Pineda Energy Solutions
C-10 Licensed · Permitted & Inspected · Los Angeles

Electrical Panel UpgradeLos Angeles

Running out of power? Tripping breakers? Planning an EV charger or solar system? A panel upgrade is the foundation. We handle everything — permits, utility coordination, installation, and inspection — by a licensed Los Angeles electrician.

C-10 Licensed
Permit Included
LADWP Coordination
Same-Day Power Restored
What We Do

Panel Upgrade Services

From simple 200A upgrades to full commercial panel replacements — we handle residential and commercial electrical panel work throughout Los Angeles.

⚡

100A to 200A Upgrade

The most common panel upgrade. Essential for EV chargers, solar, home additions, and modern appliances that demand more power.

🔧

Subpanel Installation

Add a subpanel for a garage, ADU, workshop, or addition without touching the main panel. Ideal for expanding power to a specific area.

🏠

Full Panel Replacement

Old Federal Pacific, Zinsco, or outdated panels replaced with modern, code-compliant breaker panels. Improves safety and home insurance eligibility.

🏢

Commercial Panel Upgrades

Electrical panel upgrades for retail, office, and multi-unit properties. We handle commercial-grade installations throughout Los Angeles.

Warning Signs

Signs You Need a Panel Upgrade

Most Los Angeles homes built before 1990 were wired for 60A or 100A service. Today's homes — with EV chargers, AC units, smart appliances, and home offices — regularly need 200A or more.

  • Breakers that trip frequently
  • Lights that flicker or dim when appliances run
  • A panel with fuses instead of breakers
  • You're planning to install an EV charger
  • Adding solar panels or a battery backup system
  • Your panel is a Federal Pacific or Zinsco brand
  • You're adding an ADU, garage, or home addition
  • Your home was built before 1990 and hasn't been updated

100A Panel

Standard for older homes. Struggles with modern loads. Cannot support EV chargers, solar, or large additions.

Often insufficient today

200A Panel Recommended

The modern standard for residential properties. Supports EV chargers, solar, Tesla Powerwall, and all modern appliances.

Ready for anything

400A Panel

For large homes, multi-unit buildings, or commercial properties with high electrical demand.

Commercial & large residential
How It Works

Our Panel Upgrade Process

01

Free Assessment

We inspect your current panel, load, and wiring to determine exactly what upgrade you need.

02

Permit Pulled

We handle all permit paperwork with the city before any work begins — no shortcuts.

03

Utility Coordination

We coordinate with LADWP or your utility to schedule the power shutoff and reconnection.

04

Installation & Inspection

New panel installed, all circuits reconnected, power restored, and city inspection passed.

Before & After

Panel Upgrades We've Done in Los Angeles

Real jobs, same wall. Old equipment out, new code-compliant service in — permitted and inspected.

Old Wall-Mounted Service to New Meter-Main

A tangle of surface conduit, a weathered meter board, and an aging panel replaced with a single new meter and main panel. The last photo shows the finished house, repainted, with the utility crew reconnecting the service line.

Old electrical meter, panel and conduit on a stucco wall in Los Angeles before the upgrade
Before
New meter and main panel installed on the same stucco wall after the upgrade
After
The same house repainted white with the new meter and panel in place while the utility crew works on the service line
Finished

Rusted Meter Enclosure to New 200A Meter-Main

A rusted, outdated meter enclosure swapped for a new 200A Siemens outdoor meter-main combination with a fresh weatherproof enclosure.

Rusted old electrical meter enclosure next to a new 200A Siemens meter-main box before installation
Before
New 200A outdoor meter-main panel installed and mounted after the upgrade
After

Craftsman Home: Old Meter Box to New Meter-Main With New Service Mast

An old meter and separate disconnect on a purple Craftsman replaced with a new meter-main panel, new rigid conduit, and a new service mast and weatherhead up to the utility line.

Old meter and disconnect box on the side of a purple Craftsman home in Los Angeles before the upgrade
Before
New meter-main panel with rigid conduit on the same purple house after the upgrade
After
Pineda Energy Solutions electrician wiring a new panel on the side of a house
On the job
New meter-main panel open showing service conductors and breaker bus
Panel wiring
New galvanized service mast and weatherhead reaching the utility line above a two-story house
New service mast

Upgrading Your Panel? Add an EV Charger at the Same Time

Many customers combine a 200A panel upgrade with an EV charger installation. Since the electrician is already on-site and the panel is open, adding a dedicated 240V EV circuit costs significantly less than scheduling it separately.

Learn About EV Charger Installation →
FAQ

Common Questions

How much does an electrical panel upgrade cost in Los Angeles?

A 100A to 200A panel upgrade in Los Angeles typically ranges from $1,500–$3,500 depending on the panel location, service entrance, and any additional wiring needed. We come to your property and give you a clear written price before any work begins.

Do I need a permit for a panel upgrade in Los Angeles?

Yes. All electrical panel upgrades in Los Angeles require a permit from the city and a final inspection. We handle the entire permit process as part of every job.

How long does a panel upgrade take?

Most panel upgrades are completed in one day. We coordinate with LADWP for the power shutoff and reconnection, so your power is typically restored the same day.

Do I need a panel upgrade to install an EV charger?

Not always — it depends on your current panel capacity and load. If your panel is already at or near capacity, a 200A upgrade is often needed before adding a Level 2 EV charger circuit.

Is my Federal Pacific or Zinsco panel dangerous?

Federal Pacific Stab-Lok and Zinsco panels have well-documented safety issues — breakers that fail to trip during overloads. Many home insurance companies won't cover homes with these panels. We strongly recommend replacing them.

Can you upgrade my panel and install an EV charger at the same time?

Yes — we do this regularly. Combining a panel upgrade with an EV charger installation saves time and reduces overall cost since the work overlaps.

Get Started

Get a Panel Upgrade Quote

Tell us about your home and what you're planning — we'll give you a straight answer on what you need and what it costs. No runaround. Serving Los Angeles and surrounding cities within 30 miles.

Call us directly

323-217-6960

Permits handled, inspection included

C-10 Licensed #1145631

Request a Quote

Call NowGet a Quote